Accommodating the Weight Distribution

Reese weight distribution hitch parts and sway control systems, like the reese weight distribution hitch parts, can make quite a difference in ride quality and driver control when you’re towing a sizable trailer. The reese weight distribution hitch parts system spreads the load out over the whole rig so the suspensions have proper travel and the steering and braking behave like the driver expects. The integrated sway control in the Reese Strait-Line works to keep the trailer behind the tow vehicle in harsh maneuvers, passing traffic and gusts of crosswind. We set up an obstacle course and first take the rig through it with the spring bars removed to disengage the reese weight distribution hitch parts and sway control systems. Watch how much water splashed out of the tank. The trailer swings out pretty wide and is slower to change direction and follow the truck.

For the second run we installed the spring bars to engage the reese weight distribution hitch parts and sway control systems of the Strait-Line. The trailer follows the truck much better and doesn’t swing out as far in the quick turns. Even some of the roll is taken out. With reese weight distribution hitch parts, the trailer stays behind the truck where it belongs, the ride is smoother and the driver has more control, which adds up to a more enjoyable drive behind the wheel. We’re going to keep it basic and simple so you can pick out the right one the first time and well show the steps that are needed to do that. With our measurements in hand, let’s go ahead and test it. As you can see the ball height is the same as the coupler so it looks like a perfect match. Now, reese weight distribution hitch parts system is designed for trailers with one to two axles, which would two to four break assemblies, and it is compatible with electric drum trailer breaks. So this unit corrects the sway by activating your trailer’s electric breaks and activates all the trailer breaks simultaneously, and it has an accelerometer that monitors the speed and determines the appropriate break force needed to correct sway at that speed. It also comes with a light pod that mounts no the front of your trailer and signals the system, um, is functioning properly. So what that does is that allows you to look in your rear view mirror and see the status of the reese weight distribution hitch parts system. Solid green illuminates when no issues are detected, and then various green and red light patterns signal when a fault is detected. The unit features a nice molded construction. The more effective than friction on reese weight distribution hitch parts by correcting the swaying before it becomes noticeable with its unit features a solid state gyroscope senses sway movement of your trailer when towing. To measure from the top of the hitch opening down to the ground and difference between the two measurements will tell what size shank to get the weight carrying itself which means that is the maximum weight can carry without any assistance for the hitch.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s